Dometic CRX - Installing and Connecting the Refrigerator; Installation Safety and Guidelines

EN
Installing and connecting the refrigerator CRX
22
7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
A
7.2 Notes on installing the refrigerator
!
Observe the following when installing the refrigerator:
• Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 8, page 7).
Key to fig. 8, page 7
DANGER!
If the appliance is powered by the mains, ensure that the voltage supply
has a residual current circuit breaker.
NOTICE!
• The cooling device can withstand a short term inclination of 30°, for
example on boats. When setting up the refrigerator, note that it must
be fastened to take account of this. If you have any questions regard-
ing installation, consult your specialist dealer.
• Install the refrigerator so that the warm air produced can easily flow
away (either upwards or to the sides, fig. 8, page 7).
• The appliance is designed for ambient temperatures between
+16 °C (61 °F) and +43 °C (109 °F).
• CRX110ACDC, CRX140ACDC: In winter mode the appliance can be
operated at ambient temperatures between +10 °C (50 °F) and
+16 °C (61 °F).
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
No. Explanation
1 Cold intake air
CRX50-65-80-110-140_IOM_EMEA16.book Seite 22 Mittwoch, 15. Juli 2020 12:51 12