To Next PageTo Next Page
Need help?Do you have a question about the Dometic CU402 and is the answer not in the manual?
Explains manual care, legibility, and safety symbols for proper appliance use.
Crucial safety guidelines regarding flammable materials, aerosols, modification, and usage.
Safety measures for adults and children, ventilation, and initial burn-in procedures.
Identification of control panel symbols and basic ignition procedures.
Details on selecting burners, flame regulation, and pan usage for the hotplate.
Instructions for igniting, operating, and regulating the oven and grill burners.
Guidance on electric hotplate, spit, turntable, cleaning procedures, and abnormal operation.
Specifies required clearances and cavity dimensions for safe appliance installation.
Detailed steps for connecting gas supply and electrical power (12V/230V).
Procedures for testing appliance operation, flame stability, and locating the data plate.
Safety guidelines for servicing and step-by-step instructions for replacing parts.
Visuals showing appliance overall dimensions and required cavity specifications.
Technical drawings illustrating different model configurations and burner placements.
Figures demonstrating mounting procedures, securing methods, and assembly steps.
Illustrations of test point locations and tools used for servicing components.
List of contact details for service agents and support in Australia and New Zealand.
Explains manual care, legibility, and safety symbols for proper appliance use.
Crucial safety guidelines regarding flammable materials, aerosols, modification, and usage.
Safety measures for adults and children, ventilation, and initial burn-in procedures.
Identification of control panel symbols and basic ignition procedures.
Details on selecting burners, flame regulation, and pan usage for the hotplate.
Instructions for igniting, operating, and regulating the oven and grill burners.
Guidance on electric hotplate, spit, turntable, cleaning procedures, and abnormal operation.
Specifies required clearances and cavity dimensions for safe appliance installation.
Detailed steps for connecting gas supply and electrical power (12V/230V).
Procedures for testing appliance operation, flame stability, and locating the data plate.
Safety guidelines for servicing and step-by-step instructions for replacing parts.
Visuals showing appliance overall dimensions and required cavity specifications.
Technical drawings illustrating different model configurations and burner placements.
Figures demonstrating mounting procedures, securing methods, and assembly steps.
Illustrations of test point locations and tools used for servicing components.
List of contact details for service agents and support in Australia and New Zealand.
General
