2
EN
Furnaces
NORTH AMERICAN ADDRESS INFORMATION
U.S.A. & CANADA
Service Office
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
Service Center & Dealer Locations
Visit: www.dometic.com
CONTENTS
1 Explanation of symbols and safety instructions ................................................ 2
2 Intended use ........................................................................... 3
3 Operational issues and diagnostics ......................................................... 4
4 General information ..................................................................... 6
5 Diagnostic procedures .................................................................. 18
6 Heating Issues ......................................................................... 26
7 Service procedures .....................................................................30
8 Maintenance .......................................................................... 41
9 Disposal ..............................................................................43
10 Appendix A: Supplemental bulletins .......................................................44
1 EXPLANATION OF SYMBOLS AND SAFETY INSTRUCTIONS
This manual has safety information and instructions to help you eliminate or reduce the risk of accidents and injuries.
1.1 Recognize safety information
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
1.2 Understand signal words
A signal word will identify safety messages and property damage messages, and will indicate the degree or level
of hazard seriousness.
indicates a hazardous situation that, if not avoided, could result in death or serious injury.
indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
is used to address practices not related to physical injury.
I
indicates additional information that is not related to physical injury.