Dometic DM2882 - Installation Issues

27
EN
Refrigerator
40
Optional Screw
➤ Install one screw (not provided) in the rear base.
An optional screw may be added on the opposite
side.
DM2672, DM2682, DM2683, DM2872 & DM2882
41
Screw
Bottom Frame
➤ Secure the refrigerator using two screws (not
provided) through the bottom frame of the
refrigerator.
42
Adhesive Backing
Lower Front Strip
➤ Remove the three pieces of adhesive backing tape
from the lower front strip.
➤ Align the lower front strip to the bottom frame and
install it by firmly pressing the trim piece to the
frame.
43
Screw
Top Frame
➤ Install two screws (not provided) through the holes
underneath the top frame.
➤ Seal the opening for the screws using the black
labels provided.
44
Adhesive Backing
Top Panel
➤ Remove the three pieces of adhesive backing tape
from the top decoration panel.
➤ Align the top decoration panel to the top frame
and install by firmly pressing the trim piece onto
the frame.