28
EN
Refrigerator
45
Optional Screw
➤ Install one screw (not provided) in the rear base.
An optional screw may be added on the opposite
side.
RM3762, RM3962
46
Screw
Top Decoration
Panel
➤ Secure the refrigerator using two screws (not
provided) through the holes underneath the top
decoration panel.
➤ Seal the openings for the screws on the metal
frame using tape or sealant.
➤ Install the lower front strip by sliding it under the
bottom hinge plate. Refer to "6.3 Installing the
hinge plate" on page 29.
➤ Secure the refrigerator and the lower front strip
using two screws (not provided).
47
Optional Screw
➤ Install one screw in the rear base. An optional
screw may be added on the opposite side.