EasyManua.ls Logo

Dometic DW2410 - Technical Data; Installation

Dometic DW2410
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The cleaning results are not satisfactory
Dry water drop signs on
glasses and dishes
Increase rinse aid dosage.
The detergent can be the cause.
Technical data
Dimensions Width mm 450
Height mm 460
Depth mm 480
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Capacity Place settings 5
Information on the electrical connection, voltage and overall power is given on the rating
plate on the back of appliance.
Installation
Warning! Make sure that mains plug is
disconnected from the mains socket
during installation.
Fitting the appliance
Put the appliance adjacent to a water tap and
a drain.
When you put the appliance in place, make
sure that the water hoses are not kinked or
squashed.
Install the appliance on a kitchen sink, work-
top or built-in..
Positioning
Install the dishwasher into the furniture of the
kitchen.
Min. 465
Min. 455
Min. 485
Make sure that the dimensions of the recess
agree with the given dimensions.
Make sure that there are openings in the fur-
niture for the inlet hose, the water drain hose
and the mains cable.
Adjusting the level of the appliance
Make sure that the appliance is level to close
and seal the door correctly. If the level of the
appliance is correct, the door does not catch
on the sides of the cabinet. If the door does
not close correctly, loosen or tighten the ad-
justable feet until the appliance is level.
14

Table of Contents

Related product manuals