CL440, CL460 Operation
19
6.1 Energy saving tips
• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
6.2 Using the cooling device
!
A
➤ Place the cooling device on a firm base.
➤ Connect the connection cable to the AC mains supply.
✓ The cooling device starts cooling the interior.
➤ Set the temperature controller (fig. 1 1, page 3) to the desired position:
– max: lowest temperature
– min: highest temperature
➤ If you wish to switch the cooling device off, pull out the connection cable.
➤ Clean the interior to make sure it is dry enough.
WARNING! Suffocation hazard
If children climb into unused cooling devices and close the door behind
them, they can suffocate inside the device.
If you are not going to use the cooling device for a long time, take the fol-
lowing precautionary steps:
• Remove the door.
• Leave the shelves in place so that children cannot easily climb inside.
NOTICE! Damage hazard
• Ensure that the objects placed in the cooling device are suitable for
cooling to the selected temperature.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can therefore
destroy the glass containers.
• Ensure that your cooling device is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
CL440-460-LDC-LGC-R600a-IO-EMEA16.book Seite 19 Freitag, 10. Mai 2019 8:18 20
To Next Page
Loading...
Need help?
General
