Operation CL440, CL460
18
5.2 Changing the decorative plate
➤ Change the decorative plate as shown (fig. 4 to fig. 7, page 5).
5.3 Mounting the sliding hinge (optional)
You can mount a sliding hinge that allows the cooling device door to be opened at
the same time as the door of the built-in cabinet.
➤ Mount the sliding hinge as shown (fig. 8, page 6, to fig. l, page 9).
5.4 Reversing the door
➤ Reverse the door as shown (fig. m, fig. n and fig. q, page 10).
or ...
➤ Reverse a door with a sliding hinge as shown (fig. m to fig. q , page 10).
6Operation
!
I
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
NOTE
• Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and maintenance” on
page 20).
• A few water drops may form inside the cooling device if it has been
cooling for a lengthy period. This is normal because the moisture in
the air condenses to water when the temperature in the cooling
device falls. The cooling device is not defective. Wipe it out with a
dry cloth if necessary.
CL440-460-LDC-LGC-R600a-IO-EMEA16.book Seite 18 Freitag, 10. Mai 2019 8:18 20
To Next Page
Loading...
Need help?
General
