Cleaning and maintenance CL440, CL460
20
6.3 Locking the door
➤ Turn the key a quarter turn to the left to lock the cooling device (fig. r, page 11).
6.4 Replacing the lamp
A
7 Cleaning and maintenance
!
A
➤ Use a soft cloth, lukewarm water and a mild detergent to clean the inside of the
cooling device.
➤ Wash out the cooling device using clean water and dry thoroughly.
➤ At annual intervals, remove dust from the cooling aggregate at the back of the
cooling device using a brush or a soft cloth.
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, service agent or
similarly qualified person to avoid hazard.
WARNING! Electrocution hazard
Always disconnect the device from the power supply before you clean
and service it.
NOTICE! Damage hazard
• Never clean the cooling device under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooling device.
CL440-460-LDC-LGC-R600a-IO-EMEA16.book Seite 20 Freitag, 10. Mai 2019 8:18 20
To Next Page
Loading...
