Dometic Eskimo Ice 600

Need help?

Do you have a question about the Dometic Eskimo Ice 600 and is the answer not in the manual?

Summary

Installation Instructions

Locating Ice Machine

Guidance on placing the ice machine for optimal access and corrosion prevention.

Routing Ice Delivery Hose

Instructions for routing the ice delivery hose with minimal bends and proper elevation.

Ice Delivery Hose Installation Detail

Detailed steps for installing the ice delivery hose, including vent hole placement.

Raw Water Plumbing Hook Up

Connecting the raw water pump intake and discharge hoses correctly.

Main Power Electrical Hook Up

Instructions for wiring the main power to the control box.

Raw Water Pump Electrical Hook Up

Details on wiring the raw water pump, matching voltage requirements.

Fresh Water Plumbing Hook Up

How to connect the machine to the boat's fresh water supply.

Thermostat and Sensor Installation

Temperature Control Installation

Recommendations for mounting the Ranco ETC control unit.

Sensor Installation

Guidance on locating and mounting the ice box sensor.

Start-Up Procedure Form

Owner Confirmation

Troubleshooting Ice Production

High Pressure Control Issues

Low Pressure Control Issues

Fresh Water Supply Issues

Temperature Control Functionality

Assessing the temperature control's function and potential faults.

Temperature Control Test Procedure

A step-by-step test to verify the temperature control unit's operation.

Temperature Control Adjustment

How to adjust the temperature control setpoint and differential.

Freezing Protection Measures

Moaning Sound Troubleshooting

Electrical Component Testing

Procedures to test the condition of electrical parts in the control box.

Maintenance Procedures

Monthly Routine Checks

Ranco ETC Control Details

Sensor Mounting Instructions

Wiring Diagram

Technical Assistance

24-Hour Service Hotline

The dedicated 24-hour service hotline number.