install the male plug to the pump wire (green wire to green screw, black to brass, and white to silver,
115V). (green to green, black and white to brass for 230VInsert male plug on pump into female on
the pigtail attached to the machine, if desired pigtail and plugs can be eliminated, and pump wires
directly into electrical control box. Matching crimp terminals are provided for this purpose. They are
located in the zip lock bag with the hose clamp.
Fresh water plumbing hook up
Tap into ship's fresh water line and add a shut off valve. Run 1/4" I.D. water hose from valve to 1/4"
male flare fitting on back of machine (marked “fresh water inlet”). 90 degree fitting provided in bag
with terminals and hose clamp.
To Next Page
