Dometic FlyTec FT200 Safety instructions
9
2 Safety instructions
Please observe the safety instructions and stipulations issued by the vehicle
manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
•
Faulty assembly or connection
•
Damage to the product resulting from mechanical influences
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in the operating manual
A
NOTICE!
•
If you do not have sufficient technical knowledge for installing
components in vehicles, you should have a specialist install the fly-
screen in your vehicle.
•
Check whether the dimensions of the flyscreen fit your vehicle.
•
Installation of the flyscreen requires two people.
3Scope of delivery
The screws for fastening on the vehicle are not included in the scope of delivery.
No. in
fig. 1,
page 3
Quantity Description
1 1 Skirting board
2 1 Cassette profile with flyscreen and guide cables
3 1 C pillar cover
4 7 Blind rivet (4 x 8 mm with stainless steel mandrel)
5 1 Fastening screw M5 x 30 mm and M5 nut
6 1 Guide rail above
7 1 Safety clip and screw M2.5 x 6
8 1 Deflection screw M4 with safety clip and screw M2.5 x 6
– Installation and operating manual
FT200-IO-16s.book Seite 9 Montag, 15. Januar 2018 2:19 14
To Next Page
Loading...
