What does E1 mean on my Dometic FreshJet 5 display?
The error code E1 on your Dometic Air Conditioner display indicates a room temperature sensor fault. Contact an authorized service agent or Dometic for assistance.
What does E2 mean on my Dometic FreshJet 5 display?
The error code E2 on your Dometic Air Conditioner display indicates an evaporator coil temperature sensor fault. Contact an authorized service agent or Dometic for assistance.
What does E0 mean on my Dometic FreshJet 5 Air Conditioner display?
The error code E0 on your Dometic Air Conditioner display indicates a communication failure. Contact an authorized service agent or Dometic for assistance.
What does P9 mean on my Dometic FreshJet 5 Air Conditioner display?
The error code P9 on your Dometic Air Conditioner display indicates a compressor drive abnormality or that the compressor is not starting. Contact an authorized service agent or Dometic for assistance.
What does P7 mean on my Dometic FreshJet 5 Air Conditioner display?
The error code P7 on your Dometic Air Conditioner display indicates an evaporator coil protection issue (heating mode). Contact an authorized service agent or Dometic for assistance.
What does P6 mean on my Dometic FreshJet 5 display?
The error code P6 on your Dometic Air Conditioner display indicates a condenser coil protection issue (cooling mode). Contact an authorized service agent or Dometic for assistance.
Why is my Dometic FreshJet 5 Air Conditioner not cooling well?
Your Dometic Air Conditioner might not be cooling well due to several reasons: * The unit might not be set to cooling; ensure it is. * The ambient temperature might be too high (above 52 °C) or too low (below 16 °C), as the unit is designed to cool only within this range. * The set temperature could be higher than the room temperature; select a lower temperature. * A temperature sensor, the evaporator fan, or the condenser fan might be defective. In this case, contact an authorized service agent or Dometic.
What does P4 mean on my Dometic FreshJet 5 Air Conditioner display?
The error code P4 on your Dometic Air Conditioner display indicates a discharge tube overheat protection issue. Contact an authorized service agent or Dometic for assistance.
What does P2 mean on my Dometic Air Conditioner display?
The error code P2 on your Dometic Air Conditioner display indicates a unit AC over-current protection issue. Contact an authorized service agent or Dometic for assistance.
What does P1 mean on my Dometic FreshJet 5 Air Conditioner display?
The error code P1 on your Dometic Air Conditioner display indicates under voltage protection. Contact an authorized service agent or Dometic for assistance.
General| Brand | Dometic |
|---|---|
| Model | FreshJet 5 Series |
| Category | Air Conditioner |
| Language | English |
To Next Page