Target group for this instruction manual Dometic FreshWell3000
6
2.2 Handling electrical cables
!
WARNING!
The electrical power supply may only be connected by a quali-
fied electrician (e.g. VDE 0100, Part 721 in Germany).
!
CAUTION!
Fit a fuse of at least 10 amps to the connection with the vehicle’s
power supply.
Attach and lay the cables so that they cannot be tripped over or
damaged.
A
NOTICE!
Use cable ducts to lay cables through walls with sharp edges.
Do not lay loose or bent cables next to electrically conductive
materials (metal).
Do not pull on the cables.
3 Target group for this instruction
manual
The instructions in this manual are intended for qualified personnel at work-
shops who are familiar with the guidelines and safety precautions to be
applied.
To Next Page
Loading...
