Dometic FreshWell3000 - Safe Operation Precautions

FreshWell3000 Blower speed settings
EN
11
4 Blower speed settings
In all air conditioning modes, except for the “Automatic” mode, the blower speed can be selected
manually.
5 Before first use
I
5.1 Setting the remote control
1. Insert the batteries into the remote control.
✔ The display shows all symbols for 5 seconds.
2. During these 5 seconds, press the button and the button simultaneously.
✔ The display shows the default model number.
3. Press the + button and the – button simultaneously within 3 seconds to select the model
number:
– FreshWell3000: 02
–FreshJet: 07
–FreshLight: 11
✔ The display shows all symbols for 5 seconds.
✔ The remote control is ready for operation.
Display
message
Explanation
Low blower level
Medium blower level
High blowing level
not available in the “Cooling” ( ) mode
Automatic mode
only available in the “Cooling” ( ) mode, “Heating” ( ) mode and
“Dehumidifying” ( ) mode
NOTE
Ensure that both the air intake opening and the air nozzles are free. All ventilation grilles
must always be kept free to ensure that the under-bench air conditioner is able to oper-
ate at maximum capacity.