Figure 9.
Figure10.
12. Customer service
Before you call a service engineer, carry out the following simple tests: Is there a power failure? Check
the fuses. Is the plug firmly connected to the socket and is the socket switched on? Check the socket
by plugging in another appliance, e.g. a table lamp.
Is the thermostat at the correct setting?
(normally 3 or 4).
Has the door not been closed properly causing
the inside temperature to rise too quickly?
Is the refrigerator level? Has the ventilation become obstructed? If after checking all the
above points, the refrigerator is still not working satisfactorily, contact
your nearest service engineer. State the problem,
model, product- and serial-number.
(Details of the model, product- and serialnumber
are to be found on the data label in the top left of
the inside compartment.)
To Next Page
Loading...
Need help?
General
