Using the refrigerator MF6W
8
6 Using the refrigerator
I
6.1 Energy saving tips
• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
6.2 Connecting the refrigerator
D
➤ Before you start up the device for the first time, verify that the operating voltage
matches the mains voltage (see type plate).
➤ Connect the device as follows:
• With the mains adapter supplied to the 100 – 240 V AC mains
• With the 12 V lead supplied to a 12 V socket
NOTE
Before you switch on your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter chapter “Cleaning and maintenance”
on page 10).
DANGER! Danger of fatal injuries!
Never handle plugs and switches if you have wet hands.
MF6W-O-AU.book Seite 8 Freitag, 14. Oktober 2016 6:18 18
To Next Page
Loading...
