MWO24 Operating the microwave oven
13
6.5 Saving and restoring settings
You can save the set microwave power and the power of the defrosting program
and restore them when needed.
➤ Specify the settings for cooking (chapter “Cooking” on page 10) or defrosting
(chapter “Thaw” on page 12).
➤ Press the button for at least 2 seconds.
✓ The settings were saved. The display flashes once and a short signal tone sounds.
➤ Press the button less than 2 seconds to restore the saved settings.
6.6 Displaying system parameters
The system parameters are only shown when the cooking process and defrosting
program have ended without being interrupted.
➤ Press the button to show the system parameters for the microwave oven.
Number of button presses Meaning
Press button once
Displays error code (F.00 = no errors)
Press
button twice
Displays battery voltage in volts
Press
button three times
Displays temperature of oven electronics
(in °C)
Press
button four times
Returns to cooking time
MWO24-O-16s.book Seite 13 Donnerstag, 1. Dezember 2016 1:23 13
To Next Page
Loading...
