Operation MFV5M, MF15
10
MF15
6Operation
I
6.1 Energy saving tips
• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
No. Description
1 AC voltage socket
2 DC voltage socket
3Mode switch
4 “HOT” LED (red): indicates heating mode
5 “COLD” LED (green): indicates cooling mode
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and maintenance” on
page 12).
230 V~ AC
12 V DC
HOT
OFF
COLD
1 2 3
4
5
MFV5M-MF15-O-EN.book Seite 10 Dienstag, 1. August 2017 10:17 10
To Next Page
Loading...
