- 11 -
Snap in
To mount the panel, follow these steps:
taped inside the door; if installed on the door,
door frame (3).
Snap in the decoration strip (2).
1.
2.
3.
4.
5.
mounting instRuctions
Cap the gas supply line.
Loosen the screws anchoring the refrigerator to the
enclosure.
Slide the refrigerator out of the compartment.
-
1.
2.
3.
Shut off the gas supply.
Disconnect the gas supply line at the rear of the refrigerator.
-
ing connections.
•
•
•
RefRigeRatoR Removal