PLB40 Using the appliance
11
6 Using the appliance
6.1 Before first use
➤ Before first use or storing plug the battery pack into the wall charger until it is fully
charged.
➤ Observe the information given in chapter “Charging the lithium iron phosphate
battery pack” on page 12.
6.2 Starting and switching off
Starting the lithium iron phosphate battery pack
➤ Press the power button (fig. 2 1, page 3) for at least 3 seconds to start the
device.
✔ The device emits 2 beeps.
5 The battery pack supplies energy to a device connected to
the 2-PIN output.
6 The battery pack supplies energy to a device connected to
the DC output.
7 State of charge as a percentage
8 Battery is being discharged
Battery is being charged
Battery is being charged and discharged at the same time
9 See chapter “Troubleshooting” on page 14.
No. in
fig. 3, page 4
Description
DometicPLB40_OPM_4445102672_EMEA16_20xx-xx-xx.book Seite 11 Dienstag, 26. Januar 2021 4:43 16
To Next Page
Loading...
