Dometic ProSafe MD408 - Page 25

EN
Using the safe proSafe
26
➤ Enter the room number and the alphanumeric code (e.g. 52115Ab271) and click
Get code.
✓ A new anti-tamper code (e.g. 056058) is displayed for one minute.
➤ Note down the code.
To deactivate the anti-tamper code, a new anti-tamper code must be entered:
➤ Press the ENTER button twice.
➤ Enter the new six digit anti-tamper code (e.g. 056058).
➤ Press the ENTER button.
✓ The display shows the message DELAY.
✓ After 10 seconds the safe opens and the display shows the message OPEN.
✓ Three short beeps sound.
ENTERENTER
PIN 6X
ENTER
DELAY
OPEN
MD-IO-16s.book Seite 26 Freitag, 4. August 2017 9:25 09