RC(S)(L)(D)10-Series Using the refrigerator
27
✔ Selected settings are displayed in blue.
2. Press the control knob to choose the selected setting.
3. Confirm the selection using .
To switch off the refrigerator:
➤ Press the control knob for 4 seconds.
✔ A beep sounds and the refrigerator switches off.
RC10.4S.70, RC10.4S.90, RC10.4P.100, RC10.4M.90, RCL10.4(E)S,
RCD10.5(X)S, RCS10.5(X)S
To switch on the refrigerator:
➤ To switch on the refrigerator press the button for 2 seconds.
✔ The refrigerator starts with the most recent settings.
To adjust settings:
1. Repeatedly press the
button, until the LED indicates the desired operating
mode.
2. Repeatedly press the
button, until the desired temperature level is set.
To switch off the refrigerator:
➤ To switch off the refrigerator press the button for 4 seconds.
5.5 Using the refrigerator door
RC10.4T.70, RC10.4T.90, RCL10.4(E)T, RCD10.5(X)T, RCS10.5(X)T
!
–
I
CAUTION! Risk of injury
• The refrigerator door or frozen compartment door can completely
detach from the device if used incorrectly.
• Do not lean on the open refrigerator door.
NOTE
If the door is not secured correctly on the opposite side, carefully push
on the top and bottom of the door on that side until it is secured in place.
MODE
To Next Page
Loading...
Need help?
General
