RCD10.5XES Installation
19
3. Insert the installation frame and screw it down tightly (1. in fig. b). Use all the fixing holes for this.
4. Insert the hood and screw it down tightly (2. in fig. b).
8.8 Securing the refrigerator
!
I
1. Push the refrigerator firmly into its final location with the front flange sitting hard against the recess front.
WARNING! Electrocution hazard
Only screw through the bushes built into the refrigerator side walls (fig. c), otherwise
foamed components, including electrical wiring, can be damaged.
NOTE
Ensure that the screws are tight, even when under increased loads (while driving).