Placing and connecting the device RF60, RF62
20
5.2 Operating panel
Energy selector switch
6 Placing and connecting the device
6.1 Instructions for placing the device
Observe the following when placing the device:
• Maintain at least 10 mm clearance to the walls.
• Keep the ventilation openings clear of all obstructions to ensure a good
ventilation.
➤ Place the device on a level surface. Use a water level to check this.
5 Door inserts
6 Freezer (only RF62)
No.in
fig. 2, page 3
Description
1 Energy selector switch
2 Flame indicator
3 Thermostat
4 Ignition button
Symbol
fig. 2, page 3
Description
Off
AC operation
DC operation
Gas operation
No.in
fig. 1, page 3
Explanation
To Next Page
Loading...
