Dometic rm 2353 User Manual (English)

Other manuals for Dometic rm 2353

Installation And Operating Instructions16 pages

Questions and Answers:

J
Joseph NguyenAug 2, 2025
Why is my Dometic rm 2353 Refrigerator not cooling properly?
- F
  fvaldezAug 2, 2025
  Your Dometic Refrigerator might not be cooling well due to several reasons. The burner jet or burner could be dirty or clogged, requiring cleaning. Low LP gas pressure at the burner could be the cause; in this case, set the main regulator so the pressure does not drop below 11 inches of water column at the pressure tap. The burner might not be located properly under the flue tube and needs relocation, or the burner may be damaged and require replacement. Also, check the refrigerator's level and defrost it if needed. Ensure the flue baffle is properly inserted in the flue tube.
L
Laura RodriguezAug 11, 2025
What to do if Dometic rm 2353 does not cool properly?
- M
  Michele JacksonAug 11, 2025
  If your Dometic Refrigerator isn't cooling properly, start by cleaning a dirty or clogged burner jet or burner. Ensure the refrigerator is level and defrost it. If the LP gas pressure is low at the burner, adjust the main regulator to maintain a pressure above 11 inches of water column at the pressure tap. Also, make sure the burner is correctly positioned under the flue tube, and that the flue baffle is properly inserted in the flue tube. If the burner is damaged, consider replacing it. For the thermostat settings, see Operating Instructions, part Thermostat.
J
Jeffrey ChungAug 21, 2025
How to fix Dometic rm 2353 Refrigerator that does not cool properly?
- M
  Mr. Richard LewisAug 22, 2025
  To fix a Dometic Refrigerator that isn't cooling properly, you can try the following: Clean a dirty or clogged burner jet or burner. Ensure the refrigerator is level and defrost it if necessary. If the LP gas pressure is too low at the burner, adjust the main regulator so that the pressure doesn't drop below 11 inches of water column at the pressure tap. Relocate the burner if it's not properly positioned under the flue tube. If the burner is damaged, replace it. Ensure the flue baffle is correctly inserted in the flue tube. For thermostat adjustments, consult the Operating Instructions, part Thermostat.