Dometic RM 2202 - User Manual

El DOI
USA
SERVICE OFFICE
The Dometic Corp.
509 So. Poplar St.
La Grange, IN 46761
Phone: 219 463 4858
CANADA
Dometic Dist.
866 Langs Dr.
Cambridge, Ontario
Canada N3H 2N7
Phone: 519 653 4390
FOR SERVICE CENTER
ASSISTANCE
.
CALL: 800 544 4881
~ ‘APPROVED
IN
<
OPERA;
Electrolux Siegen GmbH
In der Steinwiese 16
D- 67074 Siegen
821 2669-03 08198
r
netic
RECORD THIS INFORMATION FOR FUTURE REFERENCE
BEFORE INSTALLING THE UNIT:
Model No.
__ Serial No. _
Product No.
Date Purchased Place of Purchase
REFRIGERATOR MODEL
RM 2202
For Mobile Home or Recreational Vehicle
Installation
Operation by LP Gas, 12V DC or 120V AC
FOR CHILD SAFETY
DANGER: Risk of child entrapment. Before you throw away your old
refrigerator: Take off the doors, leave the shelves in place, so that
children may not easily climb inside.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas supply at
main valve.
2. Open windows.
3. Don’t touch electrical
switches.
4. Extinguish any open
flame.
5. Immediately call your
gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.
ITALLATION &
NG INSTRUCTIONS
INDEX
Page
I
Installation 2-
Operating Instructions
7
Maim. 8 Service 10
WARNING
Improper installation, adjustment,
alteration, service or maintenance
can cause injury or property
damage. Refer to this manual. For
assistance or additional informati-
on consult a qualified installer,
service agency or the gas supplier
AVIS
Cet appareil doit Qtre repare
seulement par un reparateur
autorise. Modification de I’appareil
pourrait Qtre extremement
dangeruse, et pourrait causer mal
ou mort.
r
REFRIGERATOR-
MODEL
RM2202
IMPORTANT INSTRUCTIONS
READ CARFULLY

Dometic RM 2202 Specifications

General

Type	Absorption
Power Source	AC/DC/Gas
Input Voltage (DC)	12 V
Gas Pressure (DIN900)	30 mbar
Energy Source	Gas, 12V, 230V

Summary

SECTION A. INSTALLATION

1. GENERAL INSTRUCTIONS

Outlines design certifications and compliance codes for installation in mobile homes or recreational vehicles.

2. VENTILATION

Details requirements for air supply, combustion product venting, and exhaust vents for separation from living space.

3. CERTIFIED INSTALLATION

Specifies requirements for certified vent system kits for installation, requiring specific upper and lower side vents.

4. METHOD OF INSTALLATION

Explains installation methods and the importance of maintaining dimensions for adequate airflow over the refrigerator.

5. VENTILATION HEIGHTS

Provides specific minimum dimensions for upper and lower vent heights for different refrigerator models.

6. CLEARANCES

Lists minimum clearances required between the refrigerator and combustible materials for safe operation.

7. INSTALLING REFRIGERATOR IN ENCLOSURE

Details how to install the refrigerator within its designated enclosure, including sealing and service space.

B. CONDENSATE DRAIN HOLE

Instructions for drilling and sealing the condensate drain hole in the flooring for proper water drainage.

C. SECURING REFRIGERATOR IN ENCLOSURE

Describes the procedure for securing the refrigerator within the enclosure using eight screws for stability.

8. GAS CONNECTION

Explains hook-up procedures for the gas supply line, emphasizing safety precautions and leak checks.

SECTION B. CERTIFIED VENT SYSTEMS

SECTION C. OPERATING INSTRUCTIONS

1. IMPORTANCE OF LEVELING A REFRIGERATOR

Proper leveling is crucial for ammonia circulation and preventing damage from overheating.

2. CONTROLS

Identifies and locates the gas and electric controls on the refrigerator for operation.

3. OPERATING INSTRUCTIONS

Details the procedures for operating the refrigerator on LP gas, 120V AC, and 12V DC.

SECTION D. MAINTENANCE & SERVICE

1. REFRIGERATOR REMOVAL

Steps for safely removing the refrigerator, including disconnecting gas and electrical supplies.

2. PERIODIC MAINTENANCE

Recommendations for regular inspection and cleaning of components for efficient and safe operation.