Using the refrigerator RUA5208X, RUA6408X, RUA8408X
28
Installing the new door panel
Proceed as follows (fig. g):
➤ Push the new panel downwards into the door. Ensure, that the vertical edges fit
into the grooves of the door frame (1.).
➤ Push the new panel downwards until the lower horizontal edge of the panel fits
into the bottom grove.
➤ Snap in the decoration strip (2.).
7.12 Reversing the door for RUA5208X
I
NOTE
For RUA5208X door reversal, an accessory hinge and latch kit is
required (not included). Contact your Dometic dealer for details.
DometicRUA5208X6408X8408X_OPM_4445102445_APAC(en)_xxxx-xx-xx.book Page 28 Friday, March 4, 2022 1:56 PM
To Next Page
Loading...
