Dometic SMP301-11 User Manual

SMP301-11
Switch-mode power supply
Installation and Operating Manual. . . . . . . . 5
Schaltnetzteil
Montage- und Bedienungsanleitung . . . . . 16
Bloc d'alimentation
Instructions de montage
et de service . . . . . . . . . . . . . . . . . . . . . . . . .27
Fuente conmutada
Instrucciones de montaje y de uso . . . . . . .39
Alimentatore a commutazione
Istruzioni di montaggio e d’uso . . . . . . . . .50
Voeding
Montagehandleiding en
gebruiksaanwijzing . . . . . . . . . . . . . . . . . . .62
Koplingsstrømforsyning
Monterings- og bruksanvisning . . . . . . . . .73
EN
DE
FR
ES
IT
NL
NO
WINDOWS, DOORS & LIGHTS
RV PRODUCTS
SMP301-11--IOM-7s.book Seite 1 Donnerstag, 21. November 2019 4:58 16

Dometic SMP301-11 Specifications

General

Output Voltage	13.8 V DC
Output Current	25A
Frequency	50/60Hz
Operating Temperature	-20°C to +50°C
Storage Temperature	-40°C to +70°C
Protection	Overload, Short Circuit, Over Temperature

Summary

Explanation of Symbols

Safety Instructions

General Safety

General safety precautions for using the product, including supervision and intended use.

Safety When Installing the Product

Guidelines for safe electrical installation and connection by qualified personnel.

Electrical Cables Safety

Operating the Product Safely

Instructions for safe operation, including checking casing integrity and disconnecting power.

Scope of Delivery

Accessories

Intended Use

Technical Description

Product Overview

Details of product components and their identification in figure 1.

Connections and Displays

Information on product connections, jumpers, and indicator LEDs as shown in figure 2.

Installing the Switch-Mode Power Supply

Fastening the Power Supply

Instructions for selecting an installation location and securely mounting the device.

Connecting the Power Supply

Steps for connecting the consumer unit, AC power, and securing cables.

Connecting Cl-bus or External Switch

Procedure for connecting the Cl-bus or an external switch for floor heating control.

Changing Switching Mode

Guidance on configuring jumpers for different switching modes (Cl-bus, 12V, power supply).

Replacing Plug-in Fuses

Procedure for replacing blown plug-in fuses with correct types and ratings.

Using the Surge Protector

Information on connecting and operating the optional surge protector for voltage protection.

Maintaining and Cleaning

Troubleshooting

Warranty Information

Disposal

Technical Data