Using the device Dometic StarLight
18
9.3 Igniting the oven
!
WARNING! Beware of injury
Use long matches or a long lighter to ignite the burner.
Remove your hand quickly as soon as the burner is lit.
I
NOTE
The oven can only be ignited if the oven door is completely open.
➤ Open the oven door completely.
➤ Open the main shut-off valve.
➤ Turn the control knob of the burner (fig. 2 3, page 2) anti-clockwise from
the neutral setting (0) to the large flame setting.
➤ Press the control knob in and hold it in this position.
➤ Ignite the burner straight away at the gas outlet (fig. 0 1, page 6) using
a long match or a suitable lighter. Remove your hand quickly as soon as
the burner is lit.
Once the burner is lit, you can release the knob after approx.
10 seconds.
➤ If the burner goes out after releasing the knob:
wait at least 60 seconds before you ignite it again.
➤ After it is ignited, check that the flames are burning on both sides along
the whole length of the burner pipe.
➤ Turn the control knob to the required position.
I
NOTE
If the oven has not cooled down from previous use, the burner may
go out straight after lighting it. In this case, blow into the burner
opening to get rid of the steam.
Ignite the oven again as previously described.
To Next Page
Loading...
Need help?
General
