12
• These personnel are regularly instructed in all matters concerning
appropriate labour safety and environmental protection, and that
they are familiar with the product manual, particularly the safety
instructions contained therein
• Any safety and warning signs on the laser marking system must not
be removed and must remain in a readable condition.
Specific Dangers
Electrical Energy
In the F-Series laser marking system, the maximum operating voltage is
the connected mains voltage, which can pose a hazard to health. The
mains voltage to be maintained is shown on the name plate.
Work on live components must only be performed by authorised
personnel.
In the case of a defective power supply, operation of the laser marking
system is to be stopped immediately and is only to be repaired by
authorised personnel.
Keep the control unit closed at all times. Only expressly authorised
personnel are permitted to open the control unit.
To Next Page
Loading...
Need help?
General
