Domo DO937DV - Before the First Use

33
DO937DV
www.domo-elektro.be
EN
PARTS
1. Temperature control knob
2. Freezer drawers
3. Levelling feet
4. Handle
BEFORE THE FIRST USE
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth.
· Avoid direct sunlight and heat. Direct sunlight may aect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
· Avoid very moist places.
· Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A dierent voltage could damage the
appliance.
· Make sure that you have access to the plug of the appliance.
· Make sure that the air can circulate around the freezer.
· For uneven surfaces, front feet can be aligned.
16
· Install the handle.
16
· Allow the appliance to stand for 2 hours before turning it on. This allows the cooling agent to settle.
· After installation, let the freezer turned on for 6 hours before using it. This way the desired
temperature can be reached.
1
2
3
4