21
SETTINGS
Warning: It is necessary to get off the bike to proceed to the settings (saddle, handlebar)
The warning decals shown on this page have been placed on the product in the locations shown below. If a decal is missing or
illegible, please contact your nearest DECATHLON store and order a free replacement decal. Place the decal on the product in
the location shown.
Product in accordance with
EN 957-1&5 class HA, ASTM F 1250 & 2276,
GB17498, not suitable for therapeutic purposes.
WARNING
• Misuse of this product may result in
serious injury.
• Read user’s manual and follow all
warnings and operating instruc-
tions prior to use.
• Do not allow children on or around
machine.
• Replace label if damaged, illegible,
or removed.
• Keep hands, feet and hairs away
from moving parts.
MAXI
110 kg / 242 lbs
9
2
29-1
1
2
3
5
4
DECATHLON - 4 bd de Mons -
59665 Villeneuve d'Ascq - France
F: (+).33.3.20.50.00
EN 957-1,5/ASTM F1250 - F2276 / 16CFR1303 / GB17498
Order : xxxxxx - xxxxxx
xxxxx
STT : xxx
DPP : DP Shangaï
Made in CHINA
Model : xxxxxxxxx
0/000.000
24
27
21
38
HOW TO ADJUST THE SEAT
POSITION
To ensure effective exercise, the seat
must be at the correct height.
When you pedal, your knees should
be slightly bent when the pedals are at
their lowest position.
To adjust the seat (27), hold the seat
and turn the knob (38) on the seat
tube. Align one of the holes on the seat
post (21) with a hole on the seat tube.
Replace the knob (38) and retighten.
It is also possible to adjust the horizontal
position of the seat. Whilst holding the
seat (27), loosen the fastening knob
(24), adjust the position of the seat and
fully retighten the fastening knob (24).
WARNING :
• Ensure that the knob is replaced
correctly in the seat tube and that it is
fully retightened.
• Never extend the seat above its
maximum height.
• Do not sit on the seat unless the
fastening knob is correctly tightened.
HOW TO ADJUST THE
HANDLEBARS
TTo adjust the handlbars (2), loosen
the knob (9), adjust the position of the
handlebars and retighten the knob.
HOW TO ADJUST THE PEDAL
STRAPS
To adjust the pedal straps, loosen the
brake system, adjust the strap to your
desired position and then retighten the
brake system.
LEVELLING ADJUSTMENT
If the bike should become instable
during use, turn one or both of the
plastic end fittings (29-2) of the rear
support (29-1) until the bike becomes
stable.
SETTING THE RESISTANCE
The braking system and the resistance
are coupled with the pedaling speed.
Resistance setting is done electrically
with the keys on the console or
according to programs.
You can make the resistance vary while
pedaling.
1
3
4
5
2
ENGLISH
To Next Page
Loading...
Need help?
General
