Donaldson Torit E-300 - User Manual

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This manual is property of the owner. Leave with the collector when set-up and start-up are complete. Donaldson Company reserves the
right to change design and specifications without prior notice.
Illustrations are for reference only as actual product may vary.
Centrifugal Mist Collector
E-100, E-200, E-300, E-500
EA-700, EA-900, and EA-905
Installation and Operation Manual
Installation, Operation, and Service Information
IOM 1B0510107 (ENG)
Revision 3
English
Master Language

Summary

General Safety Warnings for Combustible Hazards

Purpose and Intended Use of Mist Collectors

How the Mist Collector Operates

Installation Procedures and Safety

Inspection on Arrival

Installation Codes and Procedures

Guidance on complying with codes and consulting authorities for installation.

Foundations and Support Framing

Collector Location and Site Selection

Rigging and Hoisting Instructions

Electrical Wiring and Ducting

Drain Connection Instructions

Electrical Connection Diagram and Safety

Preliminary Start-Up Checks

Maintenance Overview and Checklist

Filter Replacement Procedures

Guides for replacing disposable filter liners, primary, and secondary filters.

Troubleshooting Guide

Donaldson Torit E-300 Specifications