Don' t burn this product
Do not put this product into the fire otherwise it will cause
the burning ofwood products and the explosion of the
internal electronic components. There is a danger of fire
and personnel injury.
Water and foreign matter
Water and other liquids and (metal) into this product has
the risk of causing fire and electric shock. The following
operation should be performed immediately when the
above situation occurs.
1. Turn off the power supply.
2. Ifthe power cord is used for power supply, it will be
pulled off from the wall of the power outlet.
3. Contact your dealer.
Dismantling and rebuilding
Donot disassemble this product or transform it in any way.
Otherwise it will be hazardous to electrical shock, burns or
other personal injuries. All internal inspection, adjustment
and maintenance operations should be entrusted to your
dealer.
Drop or impact
This product is subject to the risk of fire and electric shock
after falling or being subjected to a strong impact. The
operation should be performed immediately following the
above mentioned situation.
1.Turn off the power supply.
2. Ifthe power cord is used for power supply, it should be
pulled off.
3. contact your dealer.
Plastic bag
Do not put this product into the fire otherwise it will cause the
burning of wood products and the explosion of the internal
electronic components. There is a danger of fire and person
nel injury.
Keep the distance with the
product and support.
Climb the body or its support is in danger of tipping or
damage.
The children' s families should pay special attention to.
Display
You should avoid placing this product on an uneven
surface or any other unstable place. Otherwise, it will
causeit falling and a risk of injury to the person.
Product movement
Before moving this product, you must first pull off the wall
of the power outlet, the power cord plug and pull off all
other cables and connecting wires. Otherwise there will be
damage to the line, resulting in fire and electric shock
hazard.
Clean
Beforeyou clean this product, you must first remove the
power cord from the wall outlet, otherwise there is a risk of
fire and electric shock.
Interface
The interface of this product can only be connected to the
specified equipment and devices. The connection of non
designated equipment or devices have the risk of fire and
electric shock.
11
To Next Page
Loading...
