3
Operation guide: Hold down the setting button while pressing the corresponding key to set the function of this piano.
● Tone
1. Press the Tone key (A2) and press the + button and the – button to switch the tone. The digital tube shows the serial number of tone.
2. Press the number key 0-9 (D-B) can directly input the tone number (000-127), the number beyond the range is invalid.
3. Press the + button and the - button at the same time can return the default status [000] (grand piano).
● Demo
1. Press the Demo key (A2#) to play the demo song, select the demo song from 000- 020, and the digital tube displays the serial number of the demo
song.
2. Press the + button and the - button to switch the demo song.
3. Press the number key 0-9 (D-B) to directly enter the demo song number (000- 020), and the number beyond the range is invalid.
4. Press the + button and the - button at the same time can return the default status [000].
● Rhythm
1. Press the Rhythm key (B2) to play the rhythm and select the rhythm from 000 to 127. The digital tube displays the serial number of the rhythm.
2. Press the + button and the - button to switch the rhythm.
3. Press the number key 0-9 (D-B) to directly enter the rhythm number (000- 127), and the number beyond the range is invalid.
4. Press the + button and the - button at the same time can return the default status [000].
● Chord
1. Press the Chord key (C1) and cycle switch: single-finger chord → multi-finger chord → chord closure → single-finger chord → …
2. The system enters chord opening mode during the rhythm playing. Chord function: press the key in A2~f# to play the chord matching the rhythm, and
the tone of the chord changes with the pitch of the key.
● Metronome
Press the Metronome key (C1#) and cycle to switch: 1/4, 2/4, 3/4, 4/4
● Volume
1. Press the Volume - key (D1) and Volume+ key (D1#) to adjust the volume (from 00-15). The default volume is 12.
2. Press the + button and the - button at the same time to return to the default level 12 volume.
● Transpose
1. Press the Transpose - key (E1) and the Transpose+ key (F1) to adjust the transpose from -6 to 6. The default boot level is 0.
2. Hold down the Transpose - key (E1) and Transpose+ key (F1) at the same time to move back to level 0.
● Tempo
1. Press Tempo - key (F1#) and Tempo+ key (G1) to adjust the tempo from level 0 to level 16. The default boot level is 8.
2. Hold down the Tempo - key (F1#) and Tempo+ key (G1) at the same time to move back to level 8.
● Velocity Switch
1. Press the Velocity switch key (G1#) to turn off and then press it again to turn on
2. Turn on by default.
● LED Switch (Need to buy products with LED)
1. Press the LED switch (A1) to turn off, and then press it again to turn on.
2. The default LED is on (if the piano has LED)
● Split
Press the Split key (A1#) to turn on the split function, and then press it again to turn off it.
● Drum Kit
1. Press the pan Drum Kit key (B1) to turn on this function, and then press it again to turn it off.
2. When the Drum Kit is turned on, all the keys turn into percussion tone, and when turning off the Drum Kit, the percussion tone is off.
Bluetooth name: GZUT—MIDI
Support to connect mobile app and audio playback.
iPhone connection
- POPiano connection
1. Search and download POPiano APP from the App store of the iPhone.
2. Open the POPiano App after turning on Bluetooth on the iPhone, select any song, and choose to start playing after entering.
3. Click on the upper icon of the iPhone screen , and then you can choose to connect the piano through Bluetooth.
4. After confirming Bluetooth connection, the icon is displayed as a blue check mark .
- GarageBand connection
1. Turn on GarageBand App.
2. Turn on Bluetooth on your phone.
3. Open GarageBand App and click the Settings icon in the upper right corner of the screen.
4. Connect the piano's Bluetooth through the: Song Settings -Advanced - Bluetooth MIDI Devices.
- Perfect Piano and PianoBar connection
1. Download the Perfect Piano App and PianoBar.
2. Turn on Bluetooth on your phone.
3. First connect the GarageBand App. When them is connected successfully, then open the Perfect Piano App and PianoBar can be used directly.
Android phone connection
- POPiano connection
1. Search and download POPiano APP from the App store of the mobile phone.
2. Turn on the Bluetooth function, some phones need to turn on the phone location function.
3. Open the POPiano App to select any song and choose to start playing after entering.
4. Click on the upper icon of the mobile phone screen and then then you can choose to connect the piano through Bluetooth.
5. After confirming Bluetooth connection, the icon is displayed as a blue check mark .
Audio Bluetooth playback
Open the phone settings to search for the Bluetooth name: GZUT-MUSIC.
After the connection is successful, the phone music is played, and the music is emitted from the piano.
DUAL BLUETOOTH FUNCTION
● Sustain
1. Press the Sustain key (C) to enable the sustain effect, and then press it again to close.
2. Turn on the sustain function to produce sound delay effect during the performance.
● Vibrate
1. Press the Vibrate key (C#) to enable the vibrate function, and then press it again to disable it.
2. Turn on the vibrate function to produce the effect of sound vibration during the performance.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits setforth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
1
2
3
To Next Page
Loading...
