DoorHan PE200B User Manual

© DoorHan, 08.2021
Installation and Operation Manual
Control Unit for
High-Speed Door of
SPEEDROLL/
SPEEDFOLD series
with DOORHAN
SERVO Drive
General Information
2
Design
2
Installation
3
Electrical Connections 0,75 kW
3
Electrical Connections 1,5 and 2,2 kW
15
Control Unit Setting
28
Door Operation Parameters
42
Error codes
42

DoorHan PE200B Specifications

General

Brand	DoorHan
Model	PE200B
Category	Control Unit
Language	English

Summary

General Information

Safety Rules

Key safety precautions for control unit installation and operation.

Design

Installation

Electrical Connections 0.75 kW

Electrical Connection Diagrams of Optional Devices

Wiring diagrams for optional devices like lamps and sirens.

Connecting the Door in Interlock Mode

Procedure for connecting two control units for interlock operation.

Electrical Connections 1.5 and 2.2 kW

Electrical Connection Diagrams of Optional Devices

Wiring for optional devices like lamps and sirens for 1.5/2.2 kW units.

Setting the Receiving Part of the Photocell-N Photocells

Configuring the Photocell-N receiver jumper settings.

Connection Diagram of Trafficlight-LED Traffic Light

Wiring diagram for traffic light-LED for 1.5/2.2 kW units.

Connecting the Door in Interlock Mode

Procedure for connecting two control units in interlock mode.

Control Unit Setting

Set the Manual Mode

Steps to set the control unit to manual operating mode.

Choose the Limit Sensor

Procedure for selecting the type of limit sensor used.

Check the Direction of Door Curtain Rotation

Verifying the correct rotation direction of the door curtain.

Adjust Door Travel Limits

Setting the upper and lower travel limits for the door.

Set the Photocells

Configuration steps for safety photocell settings.

Set the Auto Mode

Procedure for enabling and configuring the automatic door closing mode.

Opening Speed Adjustment

Adjusting the door's opening speed parameter.

Closing Speed Adjustment

Adjusting the door's closing speed parameter.

Partial Opening Adjustment

Setting the partial opening height for the door.

Anti-Frozen Running Mode Adjustment

Configuring the anti-frozen running mode for the door.

Reset to Factory Settings

Restoring the control unit to its default factory settings.

Connection of Signal Lamp and Siren

Wiring and configuration for signal lamps and sirens.

Setting the Adv Parameter

Adjusting advanced parameters for specific functions.

Setting the Automatic Closing Time

Configuring the time delay for automatic door closing.

Setting the Maintenance Period

Setting the period for maintenance cycles.

Set the Height of Photocells Actuation

Adjusting the trigger height for photocells.

Set the Connection of the Traffic Light to the PE500B Control Unit

Configuring traffic light connections for PE500B control units.

Interlock. Setting the PE500B Control Unit

Configuring interlock settings for PE500B control units.

Interlock. Setting the PE200B Control Unit

Configuring interlock settings for PE200B control units.

Door Operation Parameters

Error Codes