DoorHan PCB-SH User Manual

Руководство по программированию платы PCB-SH
Актуально для версий
ПО — 1.0–1.1
ПЛАТА — 1.1
ПЛАТА УПРАВЛЕНИЯ PCB-SH
CONTROL BOARD PCB-SH
© DoorHan 08.17
ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ
3
ПРОГРАММИРОВАНИЕ ПРИВОДА
6
ПРОГРАММИРОВАНИЕ ПУЛЬТОВ ДУ
7
ELECTRICAL CONNECTIONS
8
DRIVE PROGRAMMING
11
PROGRAMMING OF CONTROL PANELS
12
Actual versions
soft — 1.0–1.1
pcb — 1.1
Programming instructions board PCB-SH

DoorHan PCB-SH Specifications

General

Number of Channels	2
Operating Temperature	-20°C to +55°C
Maximum Motor Power	750 W
Radio Frequency	433.92 MHz
Memory	60 transmitters
Power Supply Frequency	50 Hz

Summary

CONTROL UNIT DIAGRAM

CONTROL UNIT SCHEMATIC DIAGRAM

Detailed schematic diagram of the control unit, showing all components and connections.

CONTROL UNIT TERMINALS DESCRIPTION

Comprehensive guide to each terminal on the control unit, specifying connection types and functions.

CONNECTION DIAGRAMS FOR ACCESSORIES

Visual guides for connecting external accessories like sensors and control stations to the unit.

REMOTE CONTROLLER PROGRAMMING

SELECTING THE OPERATING MODE

Instructions on how to select and configure different operational modes for the system.

CONFIGURING AUTOMATIC CLOSING ACTUATOR

Steps to set up and configure the automatic closing function for the operator.

PROGRAMMING OF REMOTE CONTROL PANELS

RECEIVER MEMORY CLEARING

Procedure for clearing existing remote control panel codes from the receiver's memory.

RECORDING OF DOORHAN PANELS IN THE RECEIVER

Step-by-step guide to programming new DoorHan remote control panels into the receiver.

REMOTE PROGRAMMING OF DOORHAN PANELS

Detailed instructions for programming DoorHan remote control panels, including multi-panel setup.