To Next PageTo Next Page
Need help?Do you have a question about the DoorHan PE500B and is the answer not in the manual?
General| Power Supply | 220-240V AC, 50/60Hz |
|---|---|
| Output Voltage | 24V DC |
| Max Current | 5A |
| Temperature Range | -20°C to +55°C |
| Protection Class | IP54 |
| Operating Temperature | -20°C to +55°C |
| Maximum Motor Power | 500 W |
| Operating temperature range | -20°C to +55°C |
Table of ports' functions for the 0,75 kW control unit, part no. PE200B(C).
Diagrams for connecting photocells, motor power supply, encoders, brake, etc.
Table of ports' functions for 1,5 and 2,2 kW control units.
Diagrams for connecting photocells, motor power supply, encoders, and brake.
Steps to set the upper and bottom travel limits for the door.
Steps to configure safety photocell settings (Safety 1, Safety 2).
Steps to set the actuation height for safety photocells.
Table detailing door parameters and their settings for optimization.
Table of error codes, descriptions, and reasons/actions for troubleshooting.
Continuation of error codes and required actions for troubleshooting.
