DoorHan PE500B - 6.16. SET THE HEIGHT OF PHOTOCELLS ACTUATION

38
Set
1.1. Press
1.2. The display will show
Set the height of the door curtain to 10 cm from
the floor level for Safety 1
1.10. The display will show
1.8. The display will show
1.5. The display will show
Password
6666
+ - Ok Esc
Set current height as Safety 1
Height disabled
Ok Esc
SERVO
MODE
STATUS
info Err Set Mode
1.3. Press
to choose 6668
+ -
1.4. Press
Ok
1. Opening speed
2. Closing speed
3. Open slowdown
 
Ok Esc
1. Parameter
2. Limit Switch set
3. RTC Config
 
Ok Esc
1.6. Press
choose
Advanced Setting


1.9. Press
choose Sefety 1
to set the photocells
 
1.7. Press
Ok
6.16. SET THE HEIGHT OF PHOTOCELLS ACTUATION
WARNING!
The photocells won't be actuated below the set height.
1.11. Press
Ok
CONTROL UNIT SETTING