DoorHan PE500B - 6.14. SETTING THE AUTOMATIC CLOSING TIME

37
CONTROL UNIT SETTING
The display will show
6.14. SETTING THE AUTOMATIC CLOSING TIME
Set
1.1. Press
The display will show
The display will show
Password
6666
+ - Ok Esc
SERVO
MODE
STATUS
info Err Set Mode
1.2. Press
to choose 6668
+ -
1.3. Press
Ok
1. Parameter
2. Limit Switch set
3. RTC Config
 
Ok Esc
1.4. Press
choose
Parameter


1.6. Press
choose
Auto Closing Time


1.5. Press
Ok
1.Opening speed
2.Closing speed
3.Open slowdown
 
Ok Esc
Save
1.9. Press
1.8. Press
to set the desired value
+
–
to enter the main menu
1.10. Press
Esc
6.15. SETTING THE MAINTENANCE PERIOD
Set
1.1. Press
1.2. The display will show
1.5. The display will show
Password
6666
+ - Ok Esc
SERVO
MODE
STATUS
info Err Set Mode
1.3. Press
to choose 6668
+ -
1.6. Press
choose
Advanced Setting
1.4. Press
Ok
1. Parameter
2. RTC Config
3. Advanced Setting
4. Language
5. Default
 
Ok Esc


1.7. Press
1.8. Then choose Maintenance
1.9. Set the number of cycles in thousands
Ok
Auto Closing Time
5 seconds
+ - Save Esc
1.7. Press
Ok