1
1800-060 Issued 7-19
Version A
TABLE OF CONTENTS
Important Notices FCC - United States, DOC - Canada
Glossary
General Information Installation Guidelines and Safety Information
SECTION 1 - INSTALLATION
1.1 General Installation
1.1.1 Remove Components from Enclosure
1.2.1 Install Enclosure for 1803 & 1810
1.2 1803 & 1810 Surface Mount Dimensions
1.2.1 Surface Mount Recess Kit Installation for 1803 & 1810
1.3 1803 & 1810 Flush Mount Dimensions
1.3.1 Flush Mount Kit Installation for 1803 & 1810
1.3.2 Self-Standing Lighted Kiosk for 1803 & 1810
1.3.3 Flush Mount Surface Mounting Kit Installation for 1803 & 1810
1.4 1808 Dimensions and Installation
1.5 Memory Chip Replacement
1.6 Postal Lock Installation
1.7 UL 294 Compliant Tamper Switch
SECTION 2 - WIRING
2.1 Wiring Guidelines
2.1.1 Power
2.1.2 Wire Runs
2.1.3 Grounding
2.1.4 Surge Suppression
2.1.5 Ferrite Filter
2.2 Terminal Descriptions
2.3 Telephone Entry System Wiring and Adjustments
2.3.1 Speaker Volume, Microphone and Feedback
2.3.2 Click Sensitivity - Use for Rotary-Dial Phones ONLY
2.3.3 LCD Display Contrast for 1803 & 1810
2.3.4 Master Code Switch
2.3.5 Ring Pin Jumper
2.3.6 Hands Free - Hand Set Jumper
SECTION 3 - PROGRAMMING
3.1 General Programming
3.1.1 Master Code
Overview for System Programming
3.1.2 Single or Multiple Systems
3.1.3 Relay Strike Time
3.1.4 “Tone Open” Sound ON or OFF
3.1.5 Talk Time
3.1.6 Tone Open Numbers
3.1.7 Programming Switch Input 1 and Switch Input 2
3.1.8 Number of Rings Before Telephone Entry System will Answer
3.1.9 PBX Line Access Code Programming
3.1.10 Star Key Function
3.1.11 Keypad Function (DTMF Tone Programming)
3.1.12 System to Stay On-Line or Hang-Up after Touch Tone Number Pressed
3.1.13 Automatic Hang-Up Function
3
3
4
5
5
6
7
8
9
10
11
12
13
14
15
16
17
18
18
18
19
19
19
19
20
21
22
22
22
23
23
23
24
24
24
25
26
26
26
26
27
27
27
28
28
28
28
29
Table of Contents continued on next page