To Next PageTo Next Page
Need help?Do you have a question about the DoorKing 2112 and is the answer not in the manual?
General| Brand | DoorKing |
|---|---|
| Model | 2112 |
| Category | Control Systems |
| Language | English |
Detailed front, side, bottom, and back views of the surface mount unit's physical measurements.
Detailed front, side, bottom, and angled views of the flush mount unit's physical measurements and rough-in box.
Details on FCC rules, regulations, and registration number for US operation.
Information on Canadian Department of Communications certification and connection requirements.
Specifies the unit's performance levels according to UL 294 standards.
Guidelines for mounting height and reach clearances to comply with ADA accessibility standards.
Instructions for installing the 2112 using a standard internet connection via Cat5 cable.
Steps for installing the 2112 using an optional cellular module, including signal testing.
Detailed steps for removing the control board and faceplate for mounting the 2112.
Guidance on mounting the surface mount 2112 model to walls, pilasters, or using a mounting post.
Instructions for installing the flush mount 2112 unit into walls, pilasters, or kiosks, including rough-in box details.
Procedure for installing the flush mount 2112 into a DoorKing Self-Standing Lighted Kiosk.
Detailed explanation of terminals TB1, TB2, TB3, and TB4 for connecting access control devices and power.
Diagrams and instructions for connecting cellular modules or Cat5 internet cables to the system.
Recommendations and methods for proper grounding and surge protection to prevent component failure.
Detailed wiring diagram showing connections for optional cellular, Cat5, microphone, speaker, keypad, and relays.
Steps to register the 2112 online via dksti.com, requiring the System ID Number.
Information on downloading and using the DKS 2112 App for programming and video calling.
Procedure for adjusting the system's volume online after successful registration.
