2112-065-G-12-21
7
Bolt flush box into the
rough-in box with 4
supplied bolts.
2112 Flush Mount
Rough-In Box
Conduit
in Wall
IMPORTANT Choose how your
2112 will function (Internet or
Cellular connection, see sections
1.1 and 1.2).
Note: Run ALL wires that will be needed
during the cabinet installation, see section 2.
Mount “Optional external cellular module kit” in a secure protected
area if desired. Generally, the higher the cellular module is mounted,
the better the reception. Keep clear of metal.
DO NOT expose to weather.
Flush mount unit is installed into a pilaster, wall or kiosk and can be mounted outside, exposed to the weather. It is preferred
that they have limited direct exposure to the weather. We suggest that when they are mounted outdoors, it is in a covered
protected area. Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates. Run conduit
inside wall into bottom of rough-in box if desired. Use appropriate hardware (Not supplied) to secure the rough-in box in place.
Flush
Box
10.25”
7.5”
4.5”
WARNING! If this entry
system is used to control a
vehicular gate with an
automatic gate operator, the
entry system must be
mounted a minimum of six
(6) feet away from the gate
and gate operator, or in
such a way that a person
cannot operate the entry
system and touch the gate
or gate operator at the same
time.
Protective
Nonmetallic
Plastic Box
To Next Page
Loading...
