DoorKing 2112 - Flush Mount in Kiosk

2112-065-G-12-21
8
10
”
18
.5
”
60”
ONLY the flush mount can be installed into the self-standing kiosk
(P/N 1200-175).
Secure the rough-in box in the kiosk. Run all necessary wires to
rough-in box. Slide the flush box into the rough-in box and secure
them all together with hardware included in the kit.
WARNING! If this entry
system is used to control a
vehicular gate with an
automatic gate operator, the
entry system must be
mounted a minimum of six
(6) feet away from the gate
and gate operator, or in
such a way that a person
cannot operate the entry
system and touch the gate
or gate operator at the same
time.
2112 Flush Mount in a DoorKing Self-Standing Lighted Kiosk
Bolt flush box into the
rough-in box with 4
supplied bolts.
Rough-In Box
Flush
Box
Mount “Optional” cellular module in a secure
protected area as near as possible to the kiosk
clear of ALL metal. Generally, the higher the
cellular module is mounted, the better the
reception. DO NOT expose to weather.
7
7
4
4
Optional External
Cellular Module Kit
Protective
Nonmetallic Pipe
(not provided)