Operation Section
64
3. As the steer wheel angle increases, the inside
drive motor speed is progressively slowed down
with respect to the outside drive motor speed.
Unloading
1. Move the lift truck into the unloading position.
2. Tilt the mast forward only when directly over the
unloading area.
Do not tilt the mast forward with the load unless
directly over the unloading area, even if the
power is off.
3. Deposit the load and back away carefully to
disengage the forks.
4. Lower the carriage and forks to either travel
position or park position.
To Next Page
