Need help?Do you have a question about the Doosan B35X-7 B25XL-7 and is the answer not in the manual?
General| Brand | Doosan |
|---|---|
| Model | B35X-7 B25XL-7 |
| Category | Compact Loader |
| Language | English |
Importance and use of the operator restraint system for safety.
Critical safety precautions for operating and servicing the lift truck.
Potential hazards and necessary precautions during operation.
Essential warnings and precautions for safe operation.
Pre-operation checks and adjustments before starting.
Guidelines for safe and controlled operation of the lift truck.
Precautions to prevent fire and explosion hazards.
Importance and use of the operator restraint system.
Procedures for seat belt inspection, fastening, and release.
Understanding factors that cause tipover and how to avoid it.
Defining the stability base for safe operation.
Understanding load capacity ratings and load center.
Fundamental safety rules for operating forklift trucks.
Charts showing load capacity based on mast and load center.
Capacity charts for integrated side shifter models.
Capacity charts for hook-on side shifter models.
Operation of key and seat switches for system activation and safety.
Detailed checklist for daily walk-around inspections.
Step-by-step guide for operating the lift truck.
Function and operation of the emergency stop switch.
Operation of the directional control switch for travel and braking.
Technique for precise maneuvering into loads.
Safe procedures for lifting loads.
Safety instructions for handling suspended loads.
Safety instructions for handling wide loads.
Critical safety and procedural steps for towing a disabled truck.
Comprehensive guide to fork inspection, maintenance, and repair.
Steps for daily, first-use, and periodic fork inspections.
Procedure for checking insulation resistance for operator safety.
General care, safety, and maintenance for batteries.
Safe discharge procedure for power modules before maintenance.
Detailed steps for the daily walk-around inspection.
Procedures for battery inspection, exchange, and charging.
Testing, checking, and adjusting lift chains.
Changing oil and filter element in the hydraulic and power steering system.
Detailed inspection of forks for wear, damage, and straightness.
To Next Page
