OP000753Safety
1-24
Engine Starting
Walk around your machine before getting in the operator's
cabin. Look for evidence of leaking fluid, loose fasteners,
misaligned assemblies or any other indications of possible
equipment hazard.
All equipment covers and machinery safety guards must be in
place, to protect against injury while the machine is being
operated.
Look around the work site area for potential hazards, people or
properly that could be at risk while operation is in progress.
NEVER start the engine if there is any indication that
maintenance or service work is in progress, or if a warning tag is
attached to controls in the cabin.
A machine that has not been used recently, or is being operated
in extremely cold temperatures, could require a warm-up or
maintenance service before start-up.
Check gauges and monitor displays for normal operation before
starting the engine. Listen for unusual noises and remain alert
for other potentially hazardous conditions at the start of the work
cycle.
Check tire inflation and check tires for damage or uneven wear.
Perform maintenance before operation.
Do not short circuit the starting motor to start the engine. This is
not only dangerous, but may also damage the machine.
When starting the engine, sound the horn as an alert.
Start and operate the machine only while seated.
To Next Page
