Need help?Do you have a question about the Doosan D30G and is the answer not in the manual?
Specifies pressure settings for the hydraulic control valve.
Details specifications for various hydraulic pump models.
Provides flow rate specifications for lift cylinders.
Specifications and dimensions for tilt cylinders.
Specifications for mast and carriage bearings and adjustments.
Specifications for steering wheel, gear, and axle components.
Specifications for shoe brakes and related components.
Explains the basic operation of the hydraulic system.
Details the principles and operation of the hydraulic control valve.
Describes the operation of the steering system and its components.
Explains the operation of the master cylinder and brake system.
Initial steps for diagnosing problems and performing system checks.
Diagnosing issues with hydraulic systems, pumps, and valves.
Troubleshooting delayed engine shutdown and operator sensing systems.
Procedures for adjusting mast, carriage, chains, and forks.
Testing and adjusting steering wheel bearings, axle stops, and pressure.
Procedures for brake air removal, adjustment, and pedal settings.
To Next Page
General
