Need help?Do you have a question about the Doosan D60S-7 and is the answer not in the manual?
Overview of manual content, storage guidelines, and importance of reading.
Critical safety precautions, hazard identification, and warnings for operation and maintenance.
Fundamental rules for safe operation, maintenance, and repair of lift trucks.
Statement of compliance with relevant EU directives and standards.
Detailed technical specifications for various lift truck models.
Measured noise and vibration levels for operator comfort and safety.
Load capacity charts for models without side shifters.
Load capacity charts for models with side shifters.
Guides on locating and recording various serial numbers for identification.
Explains warning plates and capacity ratings for safe operation.
Layout and function of controls, displays, and indicators in the operator's station.
Explanation of gauges, indicator lights, and switches on the instrument panel.
Description of SCR display functions and indicators for diesel engines.
Operation of the audio system, including radio and media playback.
Explains the operation and setup of the optional rear-view camera.
Describes the function and operation of the seat switch system for safety interlocks.
Explanation of key controls like direction lever, transmission switches, and pedals.
Correct procedure for safely parking the lift truck.
Procedures and warnings for towing a disabled lift truck.
Guidelines for inspecting, maintaining, and repairing lift truck forks.
Procedures, pressures, and safety warnings for tire inflation.
Torque values for standard bolts, nuts, taper lock studs, and hose clamps.
Schedule for maintenance tasks based on service hours or time.
Procedure for changing engine oil and filter.
Procedure for changing transmission oil and filter.
Instructions for changing the drive axle oil.
Procedure for testing and adjusting the parking brake.
Checking and adjusting drive belts for condition and tension.
Maintenance tasks to be performed every 1000 service hours or 6 months.
Maintenance tasks to be performed every 1500 service hours or 9 months.
Maintenance tasks to be performed every 2000 service hours or yearly.
Maintenance tasks to be performed every 2500 service hours or 15 months.
Maintenance tasks to be performed every 3000 service hours or 36 months.
Proper disposal of fluids and cleaning procedures for environmental protection.
To Next Page
General
